Intercom system rebuilt
Residents’ intercoms had stopped working. We removed the old wiring and hardware, installed new cabling where required and set up modern panels and handsets for all 18 units.
Wi-Fi is convenient, but it is not where reliable speed comes from. A properly designed, structured network, with data points where you need them, a tidy cabinet and access points wired back to it, gives you fast, stable connections for work, streaming, cameras and smart devices. Our team designs, installs, tests and labels every run.
Tell us a little about your premises and what you need connected, and we will arrange a site visit, plan the network and give you a fixed, itemised price.
Tell us about your data cabling project and our team will be in touch.
Already have cameras or an intercom on the way? We cable for security and CCTV at the same time, so there is one tidy cabinet instead of three.
The cable you install now will outlast several generations of modems and devices. This is how the common options compare.
| Cable | Typical speed | Best for | Notes |
|---|---|---|---|
| Cat6 | 1 Gbps to 100 m (10 Gbps on short runs) | Most homes and small offices | Cost-effective and suitable for most needs today |
| Cat6A | 10 Gbps to 100 m | Offices, new builds, high-bandwidth homes | Thicker cable with better shielding. Future-proof for Wi-Fi 6 and 7 access points |
| Fibre | Very high, over long distances | Links between buildings or floors | Immune to electrical interference. Used for backbones |
| Coaxial | Varies | TV antenna and some NBN HFC connections | Still needed for free-to-air TV points |
Need power at the same time? Because we are electricians as well as cablers, we can add the power points, circuits and dedicated rack power your network needs in the same visit. See our general electrical services.
In Australia, customer data cabling must be installed by a registered cabler under ACMA’s cabling provider rules.
The Australian cabling standard covers how cables are installed, terminated and separated from electrical cables.
Each run is tested end to end and labelled at both ends, so faults and future changes are quick to trace.
You receive a record of what was installed and where, which is useful for IT providers, building managers and future owners.
Network problems caused by poor cabling are some of the hardest to diagnose. Speeds drop, devices disconnect and the internet provider gets blamed. Quality cable, proper separation from power, correct terminations and testing every run remove the guesswork.
For businesses, an organised cabinet with a labelled patch panel means moves, additions and IT support visits take minutes instead of hours. For homes, it means streaming, gaming and video calls just work in every room.
Planning a renovation or new build? Talk to us before the plasterboard goes up. Pre-wiring is the most cost-effective way to future-proof a home.
Residents’ intercoms had stopped working. We removed the old wiring and hardware, installed new cabling where required and set up modern panels and handsets for all 18 units.
Cabling for a three-camera system covering the driveway and back alley, with a recorder, monitor and lockable enclosure, plus new LED floodlights.
Door stations and handsets replaced across all seven units with an Aiphone GT series system, including an upgraded intercom power supply.
Zac and Lincoln from Fully Wired Electrical Services did a fantastic job preparing my property for a FTTH connection. Polite, communicative and quietly confident they went about their work confidently and with no fuss. Highly recommend them.
★★★★★Virginia Bailey, Google review
Plan one or two per desk, one behind each TV or console, and one for each ceiling access point. It is far cheaper to add spare points now than to retrofit them later.
Usually, yes. We run cables through roof spaces and wall cavities and install flush wall plates. Double-brick and slab-ceiling homes need more planning, which we explain on site.
We install and cable ceiling access points, switches and cabinets. We can work with your IT provider or recommend suitable hardware for your space.
We can prepare your property: lead-in conduits, connection box positions, power points and moving the modem location into a central cabinet. The NBN connection itself is booked through your provider.
Yes. Customer cabling must be installed by a registered cabler and comply with the Australian cabling standard. It also needs to be separated correctly from electrical wiring.
Call 1300 385 599 (Mon to Fri, 8:00am to 4:30pm) or send us your floor plan and what you need connected. We will design the network and give you a fixed price.
Select a service that you're interested in
View all services© 2026 Fully Wired Electrical Services